Centre for Research of Innovation and Sustainable Development (CRISD)

Menu

Publications in 2023 (Last update on 14.03.2024)

International Journal

  1. Iqubal, M., sathiyan, P., Alexander, Dr. S. A., Sv, D., & Peter, G. (2023). Design of a modular converter in hybrid EV charging station with efficient energy management system. Electrical Engineering, 1–20. https://doi.org/10.1007/s00202-023-01822-6
  2. Vijayakumar, A., Stonier, A. A., Peter, G., & Ganji, V. (2023). Dual source novel nine level inverter (DSN2LI) design with minimum active devices and inherent polarity generation. IET Power Electronics. https://doi.org/10.1049/pel2.12533
  3. Dorji, S., Stonier, A. A., Peter, G., Kuppusamy, R., & Teekaraman, Y. (2023). An extensive critique on smart grid technologies: Recent advancements, key challenges, and future directions. Technologies, 11(3), Article 3. https://doi.org/10.3390/technologies11030081
  4. Prabhu, S., Vijayakumar, A., Stonier, A. A., Peter, G., Dorji, S., & Ganji, V. (2023). Analysis of isolated phase windings and permanent magnet assists high energy efficient hybrid-reluctance motor for electric vehicle. IET Electrical Systems in Transportation, 13(2), e12081. https://doi.org/10.1049/els2.12081
  5. Jayakumar, T., Ramani, G., Jamuna, P., Ramraj, B., Chandrasekaran, G., Maheswari, C., Stonier, A. A., Peter, G., & Ganji, V. (2023). Investigation and validation of PV fed reduced switch asymmetric multilevel inverter using optimization based selective harmonic elimination technique. Automatika, 64(3), 441–452. https://doi.org/10.1080/00051144.2023.2173121
  6. Yadav, P. K., Bhasker, R., Stonier, A. A., Peter, G., Vijayakumar, A., & Ganji, V. (2023). Machine learning based load prediction in smart-grid under different contract scenario. IET Generation, Transmission & Distribution, 17(8), 1918–1931. https://doi.org/10.1049/gtd2.12828
  7. Vijayakumar, A., Stonier, A. A., Peter, G., Vignesh, E., & Ganji, V. (2023). Machine learning based model predictive control for grid connected enhanced switched capacitor cross-connected switched multi-level inverter (ESC3SMLI). IET Power Electronics. https://doi.org/10.1049/pel2.12546
  8. Kandasamy, P., Kumar, C., Lakshmanan, M., Jaisiva, S., Stonier, A. A., Peter, G., & Ganji, V. (2023). Initial condition based real time classification of power quality disturbance using deep convolution neural network with bidirectional long short-term memory. IET Generation, Transmission & Distribution, 17(23), 5135–5154. https://doi.org/10.1049/gtd2.13026
  9. Cr, S., Mani, G., Stonier, A. A., Peter, G., Kumaresan, P., & Ganji, V. (2023). An extensive critique on expert system control in solar photovoltaic dominated microgrids. IET Renewable Power Generation. https://doi.org/10.1049/rpg2.12875
  10. Peter, G., Alexander Stonier, A., Vanaja, D. S., Justin, F., Kuppusamy, R., & Teekaraman, Y. (2023). Battery cell balancing of v2g-equipped microgrid in the presence of energy storage aggregator. International Transactions on Electrical Energy Systems, 2023, e7990690. https://doi.org/10.1155/2023/7990690
  11. Ling, J. H., Lim, Y. T., Leong, W. K., & Sia, H. T. (2023). Learning about concrete-filled tube using chatgpt. Journal of Civil Engineering, 38(1), Article 1. https://doi.org/10.12962/j20861206.v38i1.16470
  12. Ling, J. H., Lim, Y. T., Leong, W. K., & Sia, H. T. (2023). Concrete-filled tubular column made of various types of material. Journal of Civil Engineering, 38(1), Article 1. https://doi.org/10.12962/j20861206.v38i1.15455
  13. Tat, L. Y., Ling, J. H., Sia, H. T., Kam, L. W., & Ngu, J. T. S. (2023). Improvement in the reinforced concrete beam with embedded polystyrene under static load. Indonesian Journal of Computing, Engineering, and Design (IJoCED), 5(2), Article 2. https://doi.org/10.35806/ijoced.v5i2.331
  14. Ling, J. H., Lim, Y. T., & Jusli, E. (2023). Methods to determine ductility of structural members: A review. Journal of the Civil Engineering Forum, 181–194. https://doi.org/10.22146/jcef.6631
  15. Ling, J. H., Lau, J. W., & Lim, Y. T. (2023). Structural behaviour of reinforced concrete beam with embedded polystyrene spheres. Civil and Sustainable Urban Engineering, 3(1), Article 1. https://doi.org/10.53623/csue.v3i1.180
  16. Tat, L. Y., Hou, C. C., Hua, L. J., Mohamad, M. E. B., Teck, S. H., & Kam, L. W. (2023). Experimental study of sand-cement brick with expanded polystyrene beads and silica fume as partial replacement materials. Journal of the Civil Engineering Forum, 101–108. https://doi.org/10.22146/jcef.5309
  17. Edin, T., Sulaiman, M. S., Iling, E., Tar, A., Ali, D. S. H., & Osman, M. S. (2023). Investigation on mechanical properties of bamboo-plastic composites by alkali treatment and illustration via scanning electron microscopy. Journal of Polymer & Composites, 11, 86–95.
  18. Karunakaran, P., Osman, M. S., Ting, K. C., Iiling, E., & Karunakaran, P.(2023). Research and development of a forest tree tagger system. IAR Journal of Engineering and Technology, 4 (5).
  19. Ahmed, A. S. (2023). Microwave assisted pyrolysis of moringa seed and karanja for bio-oil production. International Journal of Renewable Energy Resources, 14–24.
  20. Saleh, A., M, H., H, C., H, D. S., & M, S. (2023). An exploration of modified microwave-assisted rapid hydrothermal liquefaction process for conversion of palm kernel shells to bio-oil. International Journal of Engineering Materials and Manufacture, 8(2), 36–50. https://doi.org/10.26776/ijemm.07.02.2023.02
  21. Hossain, A. S., Alenazi, M. M. A., Ahmed, A. S. A., Alrudayni, H. A., Haouala, F., Al-Hashimi, A., Kahrizi, D., & Alhudhaibi, A. M. (2023). Seedless okra pod, chlorophyll, vitamin C and mineral content development using plant growth regulator in vitro and in vivo culture. Cellular and Molecular Biology (Noisy-Le-Grand, France), 69(13), 53–58. https://doi.org/10.14715/cmb/2023.69.13.8
  22. Moh, T. S. Y., Jin, J. J. Y., Wong, L. A., Tiong, M. C., & Chan, C. K. (2023). Wind-induced evaporative cooling passive system for tropical hot and humid climate. Frontiers in Mechanical Engineering, 9. https://doi.org/10.3389/fmech.2023.1069806
  23. Sulaiman, M. S., Edin, T., Ali, D. S. H., Osman, M., Ab Razak, A. F., & Abdullah, M. (2023). Strength and microstructural investigation on kenaf fiber reinforced polypropylene and low-density polyethylene composites. European Chemical Bulletin, 12, 2618–2625. https://doi.org/10.31838/ecb/2023.12.si4.2242023.28/04/2023
  24. Wahab, R., Sulaiman, M. S., Mohd Razali, S., Samsi, H., Zainudin, J., Mohd Ghani, R. S., & Nasihah, M. (2023). An integrated bamboo industry for upgrading the livelihood of the rural community. Research Journal of Pharmaceutical, Biological and Chemical Sciences, 14, 1–17. https://doi.org/10.33887/rjpbcs/2023.14.6.1
  25. Sulaiman, M. S., Wahab, R., Mohd Razali, S., Samsi, H., Mohd Ghani, R. S., Edin, T., & Nasihah, M. (2023). Physicomechanical and morphological structure analysis on the oil-heat treated 10 years tectona grandis. Research Highlights in Science and Technology. 152–172. https://doi.org/10.9734/bpi/rhst/v3/5391B
  26. Ab Razak, A. F., Abidin, M., Osman, M., Abdullah, M., Salleh, H., Sajali, N., Nadhira, S., Hua, T., Abdul Shukri, F. S., & Sulaiman, M. S. (2023). Development of kenaf soymilk and its physicochemical properties and sensory evaluation analysis. European Chemical Bulletin, 12, 1613–1621. https://doi.org/10.31838/ecb/2023.12.s3.182
  27. Abdullah, M. S., Sulaiman, M. S., Razak, F. A., Abidin, M. Z., Hafsanjani, M., & Razak, A. A. (2023). Physicochemical properties of nypa salt extracted from dehydration and calcination method. European Chemical Bulletin, 12 (S3), 1604 – 1612.  https://doi.org/10.31838/ecb/2023.12.s3.181
  28. Salleh, M. H., Scen, W. C., Abidin, M. Z., Razak, A. A., Razak, F. A., & Abdullah, M. S. (2023). Reverse osmosis integration into nypa fruticans palm sugar (gula apong) processing: Color development investigation using l*, a*, and b* parameter. European Chemical Bulletin, 12(12), 2696-2704 .
  29. Tiong, M. C., Yau Moh, T. S., Wong, L. A., & Phiong, D. W. S. (2022). Maximum power point tracking algorithm for solar photovoltaic system using moth flame optimization with direct control strategy. International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering, 11(1). https://doi.org/10.17148/IJIREEICE.2023.11101
  30. Hosseinzadeh-Bandbafha, H., Tan, Y. H., Kansedo, J., Mubarak, N. M., Liew, R. K., Yek, P. N. Y., Aghbashlo, M., Ng, H. S., Chong, W. W. F., Lam, S. S., Verma, M., Peng, W., & Tabatabaei, M. (2023). Assessing biodiesel production using palm kernel shell-derived sulfonated magnetic biochar from the life cycle assessment perspective. Energy, 282, 128758. https://doi.org/10.1016/j.energy.2023.128758
  31. Yek, P. N. Y., Chan, Y. H., Foong, S. Y., Mahari, W. A. W., Chen, X., Liew, R. K., Ma, N. L., Tsang, Y. F., Sonne, C., Cheng, Y. W., Tan, Y. H., & Lam, S. S. (2024). Co-processing plastics waste and biomass by pyrolysis–gasification: A review. Environmental Chemistry Letters, 22(1), 171–188. https://doi.org/10.1007/s10311-023-01654-7
  32. Foong, S. Y., Chan, Y. H., Lock, S. S. M., Chin, B. L. F., Yiin, C. L., Cheah, K. W., Loy, A. C. M., Yek, P. N. Y., Chong, W. W. F., & Lam, S. S. (2023). Microwave processing of oil palm wastes for bioenergy production and circular economy: Recent advancements, challenges, and future prospects. Bioresource Technology, 369, 128478. https://doi.org/10.1016/j.biortech.2022.128478Foong, S. Y., Liew, R. K., Yek, P. N. Y., Han, C. S., Phang, X. Y., Chen, X., Chong, W. W. F., Verma, M., & Lam, S. S. (2023). Microwave heating combined with activated carbon reaction bed: An energy-saving approach to convert seawater into freshwater. Energy, 272, 127178. https://doi.org/10.1016/j.energy.2023.127178
  33. Foong, S. Y., Cheong, K. Y., Kong, S. H., Yiin, C. L., Yek, P. N. Y., Safdar, R., Liew, R. K., Loh, S. K., & Lam, S. S. (2023). Recent progress in the production and application of biochar and its composite in environmental biodegradation. Bioresource Technology, 387, 129592. https://doi.org/10.1016/j.biortech.2023.129592
  34. Yang, Y., Foong, S. Y., Yek, P. N. Y., Mohammed, A. A. A., Verma, M., Ng, H. S., Jung, S.-C., He, Y., Peng, W., & Lam, S. S. (2023). Pyrolysis behaviour of shellfish waste via TG-FTIR and Py-GC/MS. Sustainable Chemistry and Pharmacy, 36, 101246. https://doi.org/10.1016/j.scp.2023.101246
  35. Foong, S. Y., Chan, Y., Yiin, C. L., Lock, S. s. M., Aghbashlo, M., Lim, J., Yek, P., Wan Mahari, W. A., Liew, R. K., Peng, W., Tabatabaei, M., Aghbashlo, M., & Lam, S. S. (2023). Sustainable CO2 capture via adsorption by chitosan-based functional biomaterial: A review on recent advances, challenges, and future directions. Renewable and Sustainable Energy Reviews, 181, 113342. https://doi.org/10.1016/j.rser.2023.113342
  36. Hor, C. J., Tan, Y. H., Mubarak, N. M., Tan, I. S., Ibrahim, M. L., Yek, Peter. Nai. Yuh., Karri, R. R., & Khalid, M. (2023). Techno-economic assessment of hydrotreated vegetable oil as a renewable fuel from waste sludge palm oil. Environmental Research, 220, 115169. https://doi.org/10.1016/j.envres.2022.115169
  37. Karunakaran, P., Osman, M. S., Karunakaran, P., Karunakaran, S., Karunakaran, A., & Sabang, C. L. (2023). Technical issues of a water supply project for Abit village, Sarawak, Malaysia. International Journal of Engineering Research & Technology, 12(8). https://doi.org/10.17577/IJERTV12IS080014
  38. Tan, S., Zhou, G., Yang, Q., Ge, S., Liu, J., Cheng, Y. W., Yek, P. N. Y., Wan Mahari, W. A., Kong, S. H., Chang, J.-S., Sonne, C., Chong, W. W. F., & Lam, S. S. (2023). Utilization of current pyrolysis technology to convert biomass and manure waste into biochar for soil remediation: A review. Science of The Total Environment, 864, 160990. https://doi.org/10.1016/j.scitotenv.2022.160990
  39. Karunakaran, P., Karunakaran, S., Osman, M. S., Haridas, S., Karunakaran, P., & Karunakaran, A. (2023). Farming with the utilization of IoT. Global Journal of Engineering and Technology Advances, 16(2), 124–134. https://doi.org/10.30574/gjeta.2023.16.2.0154
  40. E.Karunakaran, P. (2023). An understanding of the Indian civilization state. IAR Journal of Engineering and Technology, 4, 1-14.  https://doi.org/10.47310/iarjet.2023.v04i03.001

National Journal

  1. Huong, N. H., Dayou, S., & Osman, M. S. (2023). Fuel consumption of passenger cars at different levels of traffic congestion and traffic conditions in urban cities of Sarawak. (2023). Borneo Journal of Sciences and Technology. https://doi.org/10.35370/bjost.2023.5.1-03
  2. Ling, J. H., Toh, J. S. N., Lim, Y. T., Leong, W. K., & Sia, H. T.  (2023). Equation model for predicting the load capacity of RC hollow beams. Borneo Journal of Sciences and Technology, 5(2), Article 2.
  3. Mohd Razali, S., Mohd Ghani, R. S., Nasihah, M., & Iling, E. (2023). Usage of bamboo as an eco-friendly material in the freshwater aquaculture industry. Borneo Journal of Sciences and Technology, 5, 68–78. https://doi.org/10.35370/bjost.2023.5.2-07
  4. Sulaiman, M. S., Mohd Razali, S., Edin, T., Nasihah, M., & Iling, E. (2023). Rattan industry: An economic study to set up raw materials processing, fibre sustainability, and estimation on furniture products development. Borneo Journal of Sciences and Technology, 5, 47–53. https://doi.org/10.35370/bjost.2023.5.1-06
  5. Mohd Ghani, R. S., Lee, M. D., & Mohd Razali, S. (2023). A comprehensive review of sustainable benefit of cassava starch and its potential in wood-based and lignocellulosic materials. Journal of Emerging Technologies and Industrial Applications, 2, 1–10.
  6. Hua, T., Abidin, M., Abdullah, M., Ab Razak, A. F., Salleh, H., & Mohamad Basri, S. (2023). Optimisation of edible coating to improve the postharvest shelf-life of guava using response surface methodology. ASM Science Journal, 18, 1–10. https://doi.org/10.32802/asmscj.2023.1520
  7. Salleh, H., Scen, W., Abidin, M., Razak, A., Fattah, A., Ab Razak, A. F., & Abdullah, M. (2023). Physicochemical and minerals analysis of the pineapple juice concentrated by reverse osmosis process. Borneo Journal of Sciences and Technology, 5(1) , 40-46 https://doi.org/10.35370/bjost.2023.5.1-05
  8. Zahid, M., Cheow, C. s, Norizzah, A. R., Halimahton, M., Md Sikin, A., Ab Wahab, N., & Ishak, R. (2011). Optimization of process conditions for the application of edible coating emulsion on guava (Psidium guajava) using response surface methodology. ASM Science Journal, 18, 2023. https://doi.org/10.32802/asmscj.2023.1520
  9. Hua, T., Abidin, M. Z., Abdullah, M. S. , Ab Razak, A. F., Salleh, M. H., & Mohamad Basri, S. N. (2023). Optimization of process parameters for the edible coating application on guava using response surface methodology. Borneo Journal of Sciences and Technology, 5(2) , 55-67. https://doi.org/10.35370/bjost.2023.5.2-06
  10. Mohamad, M. E., Liang, W. A.,  Razak, A. A., Wong, C. C., & Wong, C. S. (2023). Investigation of bottom ash and fly ash in porous concrete as replacement for coarse aggregate and cement. Borneo Journal of Sciences and Technology, 5(2), 14-35. https://doi.org/10.35370/bjost.2023.5.2-02
  11. Saffaeae, N. S., Ali, D. S. H., & Kifli A. Z. (2023). Experimental study on physical properties of Peat in Sibu, Sarawak. Borneo Journal of Sciences and Technology, 5(1), 65-74. https://doi.org/10.35370/bjost.2023.5.1-08
  12. Saffaeae, N. S., Ali, D. S. H., & Kifli A. Z. (2023). An overview of polyethylene terephthalate (PET) as a partial cement replacement in soil stabilization. Borneo Journal of Sciences and Technology, 5(2), 36-39.http://doi.org/10.35370/bjost.2023.5.2-03
  13. Bujang, M.,  Bakie, N. A., Bujang, U. H., Lee, S. K., Jusli, E., & Wan Azahar, W. N. A. (2023).  Performance of asphalt mixture incorporating oil palm fruit ash as modified binder. Borneo Journal of Sciences and Technology, 5(1), 10-17. https://doi.org/10.35370/bjost.2023.5.1-02
  14. Bujang, M.,  Bakie, N. A., Bujang, U. H., Lee, S. K., Jusli, E., & Wan Azahar, W. N. A. (2023). Characteristics of oil palm fruit ash as binder in asphaltic concrete. Journal of Engineering, 35(4), 913-921.

International Conference Proceedings

  1. Karunakaran, P., Osman, M. S., Karunakaran, S., & Karunakaran, A. (2023). Research and development of a coconut meat extraction system. 2023 3rd International Conference on Intelligent Technologies (CONIT), 1–8. https://doi.org/10.1109/CONIT59222.2023.10205884
  2. Karunakaran, P., Osman, M., Hossain, B., John, K., Karunakaran, P., Karunakaran, S., & Karunakaran, A. (2023). Optimizing of bathing water heater using microwave and microcontroller technology. Proceedings of the IEEE, 1–8. https://doi.org/10.1109/APSCON56343.2023.10101161
  3. Karunakaran, P., Osman, M. S., Karunakaran, S., & Karunakaran, A. (2023). Optimized design and development of a coconut meat extraction mechanism after weighing the cost and benefit to the environment. E3S Web of Conferences, 405, 02004. https://doi.org/10.1051/e3sconf/202340502004
  4. Ismail, A., Rani, A., Jong, B. L. Z., SUHARDI, N. F., Ali, M. S. A., Osman, M. S., Fuei, P. C. & Juhim, F. (2023). Integrated vertical aquaponics monitoring system using Hibiscus Sense with Favoriot platform.12th International Conference on Applied Science and Technology 2023 (ICAST2023)
  5. Praghash, Yuvaraj, Geno, P., Stonier, & Priya (2023). Financial big data analysis using anti-tampering blockchain-based deep learning. Hybrid Intelligent Systems, 647, 1031–1040. https://doi.org/10.1007/978-3-031-27409-1_95
  6. Priya, Reddy, Sarvanan,  Alexander, H., & Geno, P. (2023). Efficient twitter sentiment analysis system using deep learning algorithm. Intelligent Systems Design and Applications, 717, 30–38.  https://doi.org/10.1007/978-3-031-35510-3_4 
  7. Yuvaraj, Praghash, Logeshwaran, Geno, P., & Stonier. (2023). An artificial intelligence based sustainable approaches—Iot systems for smart cities. AI Models for Blockchain-Based Intelligent Networks in IoT Systems: Concepts, Methodologies, Tools, and Applications, 105–120.  https://doi.org/10.1007/978-3-031-31952-5_5
  8. Alagarsamy,  Praghash, & Geno, P. (2023). An area-efficient unique 4:1 multiplexer using nano-electronic-based architecture. Proceedings of International Conference on Computational Intelligence and Data Engineering, 335–347.  https://doi.org/10.1007/978-981-99-0609-3_23
  9. Arun, Albert, Prabhu, & Geno, P. (2023). Advanced PWM scheme for 15 level binary source (1:2:4) inverter. 9th International Conference on Electrical Energy Systems (ICEES).
  10. Geno, P., & Albert. (2023). Design for short circuit withstand capability of a transformer. Advances in Engineering Research, 50.
  11. Iderus, S., Vijayakumar, Peter, G., & Stonier. (2023). Performance of modified structure asymmetrical multilevel inverter with multicarrier PWM control strategies. 5th International Conference on Inventive Research in Computing Applications (ICIRCA), 1846–1851. https://doi.org/10.1109/ICIRCA57980.2023.10220770
  12. Iderus, S., Vijayakumar, Peter, G., & Stonier. (2023). Sixty degree PWM scheme for binary source asymmetrical multilevel inverter. 5th International Conference on Inventive Research in Computing Applications (ICIRCA), 1840–1845. https://doi.org/10.1109/ICIRCA57980.2023.10220852
  13. Ali Mohamad, S. N., & Zainorabidin, A. (2023). Peat properties and stabilization in Malaysia. 3rd International Geotechnical Engineering Festival 2023.
  14. Ching, L. F., Hii, S. L., & Chin, A. K. K. (2023). Citrus reticulata waste as a potential biosorbent for dye removal. 17th ASEAN Food Conference 2023.
  15. Wee, B. F., Hwong, H. H., Sivakumar, S., Lim, K. H., Wong, W. K., Chew, I. M., & Tiong, M. C. (2023). Optimizing diabetes classification with support vector machine and SMOTEENN-based feature selection. International Conference on Digital Applications, Transformation & Economy (ICDATE).
  16. Wong, A. L., Damian, E., Shan, T. Y. M., & Tiong, M. C. (2023). A case study on optimal BESS operation to minimize fuel consumption for hybrid propulsion system. 49th Annual Conference of the IEEE Industrial Electronics Society (IES).

National Conference Proceedings

  1. Gindi, S. R., & Ten, C. K. (2023). Proximate analysis between oven-dried and vacuum-dried candied peel from baccaurea angulata coated with stingless bee honey. International Heritage and Cultural Conservation Conference 2023.

Book Chapters

  1. Wahab, R., Sulaiman, M. S., Zainuddin, J., Samsi, H. W., Razali, S. M., Razak, A. F. A., & Iling, E. (2023). Engineered wood products from planted tropical timber species. In Current Applications of Engineered Wood. IntechOpen. https://doi.org/10.5772/intechopen.112203
  2. Wahab, R., Sulaiman, M. S., Mokhtar, N., Mohd Ghani, R. S., Razali, S. M., Edin, T., & Iling, E. (2023). Acacia wood cultivation, harvesting & processing. In UTS Publisher.

Preprint

  1. D.S, M., Rasmidi, R., Chee, F., Salleh, S., Rumaling, M. I., Juhim, F., Abdul Rani, Ts. A. I., & Chang, J. (2023). Finite element analysis of radiation effects on metal oxide based semiconductor (mos) for space borne application (preprint). Sciences (Radiation and Radiography) https://doi.org/10.20944/preprints202304.0525.v1

Updated by Dr. Francis Tieng, 14.03.2024